Calibrating The Océ 5250 - Oce 5250 User Manual

Calibrating the Océ 5250
The following three adjustments are available on the printer:
Head alignment (Auto-registration)
print head, to ensure an optimal overlap of coloured dots.
X-alignment
X-accuracy
The calibration process involves the following phases:
Printing the registration print (print head alignment)
Printing the X-alignment print, then entering an X-alignment correction
value, if necessary
Printing the X-accuracy print, and entering an X-accuracy correction value,
if necessary
Setting the priority between the X-alignment and the X-accuracy
These three adjustments are independent of each other. You can make
Note:
one or two at a time. All three adjustments are necessary to have a fully
calibrated printer.
The carriage height also affects the printer precision. To adjust the
Note:
carriage height, see 'Adjusting the carriage height' on page 146.
Advanced functions
to control the smoothness of area fills
to control the accuracy of vector dimensions
to control the relative dot position of each
85