Problems Using Colour - Oce 5250 User Manual

Problems using colour

No colour
Problem
Solutions
Wrong colours
Problem
Solutions
Troubleshooting
Your print is in black and white
Check that Colour Mode is set to Full Colour before you send your
drawing to the printer (see 'Setting the colour mode' on page 53)
Check that you have set the 'Pen priority' parameter for the graphic
language you are using to 'Setup'. If the 'Pen priority' option is set to
Language, you should not define your pen colours on the control pan-
el, or in a remote configuration file (see 'Defining the pen priority' on
page 74).
Your drawing is printed with the wrong colours
Check the Pen priority setting (see 'Defining the pen priority' on
page 74). Choose whether you want to use the pen colours defined in
your software application file, or on the printer control panel, or the
remote configuration file.
Check the definition of colours in your printer driver, if applicable
149