Autoscaling - Oce 5250 User Manual

Autoscaling

Autoscaling enlarges or reduces proportionally your drawing to fit the media
size or format.
Autoscaling applies only with vector files.
Note:
You have the following autoscaling options, depending on the selected media
mode (roll or cut sheet) and format standard (ISO, ANSI or Architect):
The printer clips the area outside the margins, if your drawing is larger
Off
than the physical dimensions of the media.
(Cut sheet) The printer enlarges or reduces the drawing, and rotates it 90°,
On
if necessary, to fit the cut sheet media loaded.
Best fit
reduces the drawing to the nearest standard size that fits. It also rotates the
drawing 90°, if necessary. You can select any format for a given standard (ISO,
ANSI or Architect).
ISO: A4, A3, A2, A1, A0
ANSI: A, B, C, D, E
Architect: A', B', C', D', E'
60 Océ 5250 user manual
(Roll media) For prints larger than the loaded media, the printer