Table of Contents
Advertisement
To Search Using the Intelligent
Search
1.
Click on the video screen on
where you want to search.
2.
Click Intelligent Search . The
Intelligent
Search
would appear at the lower left
corner of the screen.
3.
When the Intelligent Search
Setting dialog box and motion
detector frame appear, you may
adjust the sensitivity bar and the
motion detector frame size and
location. To set motion detector frame size and location, left click and drag on the
screen. Then, click OK to start searching. The video search would stop at the
frame that matches the condition. To keep on searching click
4.
You may also set to search and list all the result. Just check the List box. In the
Search Duration section, set the Begin Time , End Time and Searching Interval .
Then, click OK to start searching.
3.11 To Setup the PTZ camera
1.
In the PTZ control panel, click Setup .
2.
When the PTZ Setup dialog box appears, select the camera number and check
the Use PTZ box.
3.
In the Connection Settings section, select the COMPort where the PTZ camera is
connected, PTZ ID number and PTZ camera model. Then, click Save to keep the
settings.
4.
Use the PTZ control panel and adjust the position of the PTZ camera.
5.
In the Preset Setting section, select the preset number to assign a number for the
PTZ camera current position. Set the DwellTime (1-60 sec) for how long the PTZ
camera stays in that position before it moves to the next one. If you want to add
text
(red)
18
.
Advertisement
Table of Contents
