Table of Contents
Advertisement
3.12 To Setup the PTZ/IP PTZ Camera
3.12.1 Setup the PTZ Camera
1. In the PTZ control panel, click Setup.
2. When the PTZ Setup dialog box appears, select the camera number and check the Use PTZ box.
3. In the Connection Settings section, select the COMPort where the PTZ camera is connected, PTZ ID
number and PTZ camera protocol. Then, click Save to keep the settings.
4. Use the PTZ control panel and adjust the position of the PTZ camera.
5. In the Preset Setting section, select the preset number to assign a number for the PTZ camera current
position. Set the DwellTime (1-60 sec) for how long the PTZ camera stays in that position before it
moves to the next one. If you want to add description, check the Show Preset Name box and in the
Preset Name text box, type the word. When done, click Save to keep the settings.
6. Repeat step 4 & 5, if you want to save another PTZ camera position.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ camera has
been moved. Mark the check box and set the time period in second.
8. When done, click OK to save the setting or Click Cancel, to leave without saving the new setting.
9. The on screen PTZ controller is enabled when the IP PTZ camera is connecting to NX DVR system.
User will see a small PTZ controller icon display on the right corner of channel screen.
10. Click on screen PTZ controller icon to call out the control l panel.
- User can move the on screen PTZ controller to any position of screen
i
The on screen PTZ controller only will display on one channel screen at a time.
-
40
Advertisement
Table of Contents
