Print on special material
Check to insure that the required size and orientation are selected.
[44] Select the tray and the required paper size
Press the start key .
4.
Press the correction key to leave your mailbox.
5.
Press the correction key once more to enter the default operating mode of the Océ
6.
VarioPrint 2070 Prémia Class.
Printing a job on special material placed in the special tray
Place the required special material in the special tray.
1.
The face-down side is printed.
Select the job in the mailbox.
2.
Activate the 'Paper' section.
3.
Make sure that the 'Paper input' card is open.
4.
Select 'Special feeder' in the 'Source' function box.
5.
Select the size and orientation of the special material you inserted in the 'Size' function
6.
box.
[45] The special tray and the required paper are selected
Press the Start key .
7.
Press the correction key to exit your mailbox.
8.
Press the correction key once more to enter the default mode of the Océ VarioPrint
9.
2070 Prémia Class.
70
Chapter 2 - The Print Function