Oce VarioPrint 2070 Prémia Class User Manual page 199

Instructions
For the equipment connected via a wall socket: locate the machine close to a wall
socket that is easily accessible.
For the equipment connected via a fixed connection to the electricity grid: the discon-
nect device in the fixed connection should be easily accessible.
Never connect the machine to a mains voltage deviating from the value as defined
on the power-marking label. If connection to a different mains voltage is required,
contact your local Océ organization.
Do not use another mains connection cable than the one supplied with the machine.
When replacement of the main connection cable is required, because the cable is
damaged or defect, contact your local Océ organization for a correct replacement of
the mains connection cable.
Surroundings
#
Instructions
Do not block the ventilation openings of the machine.
Ensure that the machine is placed on a level, horizontal surface of sufficient strength.
See the Océ VarioPrint 2070 Prémia Class Product safety data sheets in this appendix
for information about the weight of the equipment.
Ensure there is sufficient space around the machine. This facilitates reloading materials
as well as maintenance.
Do not place the machine in rooms which are too small or insufficiently ventilated.
See the Océ VarioPrint 2070 Prémia Class Product safety data sheets in this appendix
for information about the recommended room volume and ventilation.
General
#
Instructions
Always use materials recommended by Océ and developed for this Océ machine.
Materials not approved by Océ may result in faults in your machine.
Do not use the machine when it is emitting unusual sounds. Remove the plug from
the power socket or turn off the fixed connection to the electricity grid and contact
your local Océ organization.
Instructions for safe use
Appendix B - Safety Information 199