Oce VarioPrint 2070 Prémia Class User Manual page 125

Activate the 'Extra' section.
Open the 'Original type' card.
Keep the setting or change the original type.
Press the Combine key .
6.
The originals of the job part are copied.
[95] Copy subsequent job part
Repeat steps 2, 5 and 6 for each subsequent job part.
7.
Press the Start key
8.
[96] Finish the job
Press the Start key
9.
Note:
The request, to confirm the end of the job, can be disabled by the Key operator.
to finish the job.
to confirm the end of the job.
Copy separate job parts
Chapter 3 - The Copy Function 125