Make an enlarged or reduced digital document
Activate the 'Digital document' section.
6.
Make sure that the 'Page size' card is open.
Select the size and orientation in the 'Size' function box.
7.
Make sure that the orientation matches the feed direction of the original.
[152] Select the size. The enlargement and reduction is not adjusted automatically
Adjust the 'Enlargement or reduction'.
8.
Use the Arrow keys
[153] Adjust the enlargement and reduction
Press the Start key .
9.
170
Chapter 4 - The Scan Function
or
to select one of the pre-set values.