Oce VarioPrint 2070 Prémia Class User Manual page 173

How to change the resolution
Put and align the originals face down into the automatic document feeder.
1.
Select the 'Scan' mode .
2.
The 'Workflow' section opens automatically.
Select a 'Scan profile' with the Arrow keys .
3.
Activate the 'Original' section.
4.
Select '1-sided' or '2-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of the infor-
5.
mation and the binding edge of the originals.
Activate the 'Digital document' section.
6.
Make sure that the 'Page size' card is open.
Select the size and the orientation of the required page in the 'Size' function box.
7.
Make sure that the orientation of the required page matches the feed direction of the
photo.
Activate the 'Digital document' section.
8.
Open the 'Image quality' card.
Use the Arrow keys
9.
[155] Adjust the resolution
Press the Start key .
10.
Improve the image quality of the digital document
to adjust the 'Resolution'.
Chapter 4 - The Scan Function 173