The enlargement or reduction is automatically adjusted and is displayed in the 'Basic
settings' section.
[101] Select the special tray and the size of the required material
Activate the 'Basic settings' section.
7.
Select '1-sided' or '2-sided' in the 'Original' function box.
8.
When copying 2-sided on the special material, feed the sheet into the special tray a second
time.
Note:
The 'Staple' and 'Copy' functions are locked.
Select the number of copies.
9.
Press the Start key .
10.
Close the special tray.
11.
Note:
You can use the platen to copy the originals on the special material. Remember that the
enlargement or reduction is not adjusted automatically
copy' on page
126.
Copy on special material
'Make an enlarged or reduced
Chapter 3 - The Copy Function
131