Oce VarioPrint 2070 Prémia Class User Manual page 145

Wait until the interrupt symbol
2.
[115] The interrupt mode is entered
Enter the settings for a new job.
3.
Press the start key
4.
[116] Start a job in the interrupt mode
Repeat steps 3 and 4 for each subsequent job, if present.
5.
Press the interrupt key
6.
The suspended copy job will continue.
[117] The suspended job continues
Note:
The Océ VarioPrint 2070 Prémia Class automatically quits the interrupt mode two
minutes after the last job.
is displayed in the message box.
to start the new job.
to quit the interrupt mode.
Interrupt a copy job
Chapter 3 - The Copy Function 145