Oce VarioPrint 2070 Prémia Class User Manual page 172

Improve the image quality of the digital document
Use the Arrow keys
10.
[154] Select Photo to improve the image quality
Press the Start key .
11.
How to improve the image quality if the originals are mainly text
Put and align the originals face down into the automatic document feeder.
1.
Select the 'Scan' mode .
2.
The 'Workflow' section opens automatically.
Select a 'Scan profile' with the Arrow keys .
3.
Activate the 'Original' section.
4.
Select '1-sided' or '2-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of the infor-
5.
mation and the binding edge of the originals.
Activate the 'Digital document' section.
6.
Make sure that the 'Page size' card is open.
Select the size and the orientation of the required page in the 'Size' function box.
7.
Make sure that the orientation of the required page matches the feed direction of the
photo.
Note:
When the size of the digital document does not match the dimensions of your photo,
you must adjust the enlargement or reduction
ment' on page
Activate the 'Digital document' section.
8.
Open the 'Image quality' card.
Select 'Text' in the 'Optimize' function box.
9.
Use the Arrow keys
10.
Press the Start key .
11.
172 Chapter 4 - The Scan Function
to adjust the 'Lighter or darker' value from 2 down to -2.
168.
to adjust the 'Lighter or darker' value from 2 down to -2.
'Make an enlarged or reduced digital docu-