Oce VarioPrint 2070 Prémia Class User Manual page 108

Prepare the copy job
Note:
Make two job parts for your copy job, when you have one 2-sided, non-standard original
to copy from the platen.
Insert the originals
You can place the originals in a long-edge feed direction or in a short-edge feed direction.
The alignment of the original on the platen refers to the feed direction in the automatic
document feeder.
#
To insert the originals, proceed as follows.
Hold the originals, face-up in reading direction.
Turn the original over, in anti-clockwise direction.
Keep the originals face-down, to insert.
[68] Short-edge feed direction (left) and long-edge feed direction (right) of the originals in the
automatic document feeder
[69] Short-edge feed direction of the original on the platen
108 Chapter 3 - The Copy Function