Oce VarioPrint 2070 Prémia Class User Manual page 169

Making an enlarged or reduced digital document with the automatic document
feeder
Place and align the originals face down in the automatic document feeder.
1.
Follow the feed direction according to the dimensions and orientation of the information
on the originals.
Select the 'Scan' mode .
2.
The 'Workflow' section automatically opens.
Select a 'Scan profile' using the arrow keys .
3.
Activate the 'Original' section.
4.
Select '1-sided' or '2-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of the infor-
5.
mation and the binding edge of the originals.
Activate the 'Digital document' section.
6.
Make sure that the 'Page size' card is open.
Select the size and the orientation in the 'Size' function box.
7.
Check that the orientation matches the feed direction of the originals.
The enlargement or reduction is automatically adjusted.
[151] Select the size. The enlargement and reduction rate is automatically adjusted
Press the start key .
8.
How to make an enlarged or reduced digital document with the platen
Place and align the original face down on the glass plate.
1.
Follow the feed direction according to the dimensions of the original.
Select the 'Scan' mode .
2.
The 'Workflow' section opens automatically.
Select a 'Scan profile' with the Arrow keys .
3.
Activate the 'Original' section.
4.
Select '1-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of the infor-
5.
mation of the original.
Make an enlarged or reduced digital document
Chapter 4 - The Scan Function 169