Oce VarioPrint 2070 Prémia Class User Manual page 179

#
Tray
4
1,2,3
1,2,3
Note:
Océ Service configures the paper size and orientation that can be used in tray 2 and 3.
You can use tray 1 for size A3/Tabloid 11x17, A4/Letter 8.5x11 and A5/Us Std 5.5x8.5
paper.
When to do
Add new paper when:
A message is displayed, to indicate that paper tray 4 is empty.
There is not enough paper for a large job.
Before you begin
Take the paper from the pack.
Remove the top sheet and the bottom sheet.
Grip the pack of paper, at the two short sides, and bend the paper.
Attention:
The outer sheets and the edges of the sheets in a pack of paper can be contaminated with
glue from the wrapping. Do not use the contaminated sheets. If the glue enters the pro-
cessing section, the drum will become dirty. You will require assistance from Océ Service.
Orientation of paper
Long-edge
Long-edge
Short-edge
Add paper to the paper trays
How to place the paper
Chapter 5 - Maintenance 179