Oce VarioPrint 2070 Prémia Class User Manual page 116

Types of copy job settings
'Copy type' card
Function
'Copy type'
[85] 'Copy layout' Card
'Copy layout' Card
Function
'Layout'
'Margin shift'
116 Chapter 3 - The Copy Function
#
Description of the function
The icons in the function box display the orientation of the informa-
tion and the binding edge of the copies.
If you place the originals in the automatic document feeder, the
'Original type' setting is passed on to the 'Copy type' setting.
You can change the 'Copy type' setting, but you cancel the link be-
tween the settings.
To restore the link, press the correction key .
The default 'Copy type' setting is used for a copy job on the platen.
#
Description of the function
The 'Normal' value is the default setting.
The 'Booklet' function allows you to create a finished booklet
a booklet' on page
The properties of the booklet are defined by the feed direction, the
selected paper size and the orientation of the information on the
originals.
Four images are printed, by default, on one sheet of paper.
Some settings are disabled by the 'Booklet' setting.
See the result of the settings in the feedback box, next to the 'Copy
type' function box.
The '2-images' function allows you to copy two original pages on
one side.
The 'Margin shift' function allows you to change the default margin
settings for the front and the rear pages from + 25 mm down to - 25
mm.
See the result of the settings in the feedback box, next to the 'Margin
shift' function box.
Check that the increased margins do not result in lost image informa-
tion.
132.
'Create