Oce VarioPrint 2070 Prémia Class User Manual page 159

Function Description of the function
'Resolution' The 'Automatic' value is the default setting in the 'Resolution'
function box.
The Océ VarioPrint 2070 Prémia Class uses the resolution as defined
in the selected scan profile.
Adjust the resolution manually if you want to use a different value.
[136] 'Page size' Card
'Page size' Card
#
Function Description of the function
'Selection' The 'Automatic' value is the default setting in the 'Selection' function
box.
The value changes to 'Manual' when you select a different size.
'Size' The selected 'Size' for the digital document matches the information
scanned by the automatic document feeder.
The platen does not detect the dimensions of the originals, so the de-
fault size setting does not change.
Make sure that the orientation of the selected page size matches the
feed direction of the originals
'Enlarge- The 'Automatic' value is the default setting in the 'Enlargement or re-
ment or re- duction' function box.
duction' The Océ VarioPrint 2070 Prémia Class calculates the ratio, according
to your settings when you use the automatic document feeder.
Adjust the 'Enlargement or reduction' manually if you need an enlarged
or reduced digital document with the glass platen
or reduced digital document' on page
Note:
You can enter the Key Operator mode when you open the 'Special settings' card in the
'Digital document' section. The Key Operator mode is protected and requires a password
entry.
Types of scan job settings
'Preparing the Scan Job' on page
168.
Chapter 4 - The Scan Function
153.
'Make an enlarged
159