Oce VarioPrint 2070 Prémia Class User Manual page 138

Copying a Book or Magazine
Note:
When you select 'Left', the page at the left side of the platen will be scanned.
Note:
Some settings are pre-set by the book copying selection.
Select the number of copies.
7.
Press the
8.
How to make a booklet with book copying
Place and align the covers of the book face down on the platen.
1.
Make sure that the binding points to the symbol on the edge of the platen and the front
cover is at the left side of the platen.
Select the 'Copy' mode.
2.
The 'Basic settings' section opens automatically.
Activate the 'Extra' section.
3.
Open the 'Original type' card.
4.
Select 'Book' in the 'Layout' function box.
5.
Press the Arrow keys
6.
Open the 'Copy layout' card.
7.
Select 'Booklet'.
8.
Activate the 'Paper' section, if the required page size does not change.
9.
Select A3/Tabloid 11x17 if the page size of the original and the required page size of the
copy are A4/Letter 8.5x11.
Select A4/Letter 8.5x11 if the page size of the original and the required page size of copy
are A5/Us Std 5.5x8.5.
Activate the 'Basic settings' section, if the required page size changes.
10.
Select 71% if the page size of the original is A4/Letter 8.5x11 and the required page size
of the copy is A5/Us Std 5.5x8.5.
Press the Combine key
11.
Open the book. Place and align the opened book or magazine face down on the platen.
12.
Open the 'Original type' card.
13.
Select 'Book' in the 'Layout' function box.
14.
Press the Combine key
15.
Repeat steps 12 and 15 for each subsequent pair of book pages.
16.
Repeat steps 12 and 15 for the last page and the back side of the back cover.
17.
Place and align the covers of the book face down on the platen.
18.
Press the Arrow keys
19.
138 Chapter 3 - The Copy Function
key.
to select 'Left' in the 'Layout' function box.
to scan the front cover.
to scan both pages.
to select 'Right' in the 'Layout' function box.