Oce VarioPrint 2070 Prémia Class User Manual page 130

Copy on special material
The enlargement or reduction is automatically adjusted and displayed in the 'Basic settings'
section.
[100] Select the tray that has the special paper
Activate the 'Extra' section.
8.
Open the 'Original type' card.
Keep the setting or change the original type.
Open the 'Copy type' card.
9.
Keep the setting or change the copy type.
Select the number of copies.
10.
Press the Start key .
11.
Note:
You can use the platen to copy the originals on the special material. Remember that the
enlargement or reduction is not adjusted automatically
copy' on page
Copying on special material inserted in the special feeder
Place and align the original face down in the automatic document feeder .
1.
Follow the feed direction according to the dimensions and orientation of the information
on the original.
Insert the special material in the special feeder.
2.
The face-down side is copied.
Select the 'Copy' mode .
3.
The 'Basic settings' section automatically opens.
Activate the 'Paper' section.
4.
Make sure that the 'Paper input' card is open.
Select 'Special feeder' .
5.
Select the required size and orientation of the inserted material in the 'Size' function box.
6.
The upper icon provides non-standard sizes to select.
130 Chapter 3 - The Copy Function
126.
'Make an enlarged or reduced