Oce VarioPrint 2070 Prémia Class User Manual page 115

Function
'Tray'
'Special
feeder'
'Extra' Section
[84] 'Copy type' Card
Description of the function
The selected size is related to the dimensions of the originals, detected
by the automatic document feeder. You can change the size.
The platen does not detect the dimensions of the originals, so that the
default setting (A4/Letter 8.5x11 from tray 4) is used, unless you change
the size.
Make sure that the orientation of the selected size matches the feed
direction of the originals.
The current size is displayed in the 'Paper' section.
If the orientation of the stock of paper in the tray does not match the
feed direction of the originals in the automatic document feeder, the
Océ VarioPrint 2070 Prémia Class rotates the image 90°.
If rotation of the image occurs, a rotation symbol
'Extra' section.
The 'Special feeder' value allows you to use special material, such as
an overhead sheet 'Input Trays and Output Bins' on page
When you use the special feeder, you must select the paper size of the
special material 'Add paper to the special tray' on page
Additional to the standard sizes (A3/Tabloid 11x17, A4/Letter 8.5x11
and A5/Us Std 5.5x8.5), you can insert special paper sizes in the special
feeder 'Copy on special material' on page
The upper icon in the 'Size' function box provides several sizes to select
from.
Types of copy job settings
is displayed in the
182.
129.
Chapter 3 - The Copy Function
192.
115