Oce VarioPrint 2070 Prémia Class User Manual page 155

Note:
Make two job parts for your scan job, when you have one 2-sided non-standard original,
to scan from the platen.
Insert the originals
You can place the originals in a long-edge feed direction or in a short-edge feed direction.
The alignment of the original on the platen refers to the feed direction in the automatic
document feeder.
#
To insert the originals, proceed as follows.
Hold the originals, face-up in reading direction.
Turn the original over, in anti-clockwise direction.
Keep the originals face-down, to insert.
[127] Short-edge feed direction (left) and long-edge feed direction (right) of the originals in the
automatic document feeder
[128] Short-edge feed direction of the original on the platen
Preparing the Scan Job
Chapter 4 - The Scan Function 155