Copy one set of originals
Place and align the originals face down in the automatic document feeder.
2.
Follow the feed direction according to the dimensions and orientation of the information
on the originals.
Select the 'Copy' mode .
3.
The 'Basic settings' section opens automatically.
[88] The Basic section
Select '1-sided' or '2-sided' in the 'Original' and 'Copy' function boxes.
4.
Select 'Yes' or 'No' in the 'Staple' function box.
5.
Activate the 'Extra' section.
6.
Open the 'Original type' card.
Keep the setting or change the original type.
[89] The Original type card, when a 1-sided original is selected
[90] The Original type card, when a 2-sided original is selected
Open the 'Copy type' card.
7.
120
Chapter 3 - The Copy Function