Oce VarioPrint 2070 Prémia Class User Manual page 127

The enlargement or reduction is adjusted automatically and is displayed in the 'Basic
settings' section.
[97] Select the size. The enlargement or reduction is adjusted automatically
Activate the 'Extra' section.
7.
Open the 'Original type' card.
Keep the setting or change the original type.
Open the 'Copy type' card.
8.
Keep the setting or change the copy type.
Select the number of copies.
9.
Press the Start key .
10.
How to make an enlarged or reduced copy with the platen
Place and align the original face down on the platen.
1.
Follow the feed direction according to the dimensions of the original.
Select the 'Copy' mode .
2.
The 'Basic settings' section opens automatically.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3.
Select 'No' in the 'Staple' function box.
4.
Activate the 'Paper' section.
5.
Make sure that the 'Paper input' card is open.
Select the required size and orientation in the 'Source' function box.
6.
The selected size is displayed in the 'Paper' section.
[98] Select the paper size. The enlargement and reduction is not adjusted automatically
Activate the 'Basic settings' section.
7.
Make an enlarged or reduced copy
Chapter 3 - The Copy Function 127