Oce VarioPrint 2070 Prémia Class User Manual page 111

#
Procedure
Does not change the default binding and information-orientation settings.
The dimensions of the original on the platen cannot be detected.
Does not change the default enlargement or reduction.
'Basic settings' Section
[76] 'Basic settings' Section
'Basic settings' Section
Function
'Original'
'Copy'
'Staple'
'Enlargement
or reduction'
#
Description of the function
Definition of the original: '1-sided' or '2-sided'
Definition of the copy: '1-sided' or '2-sided'
The internal stapler can operate when the finisher is used
stapling' on page 27.
Use the off-line stapler for the other completed sets.
The value 'Automatic' is the default setting in the 'Enlargement or
reduction' function box.
The Océ VarioPrint 2070 Prémia Class calculates the ratio, accord-
ing to your settings when you use the automatic document feeder.
Adjust the 'Enlargement or reduction' manually if you need an en-
larged or reduced copy with the glass platen
reduced copy' on page
The current 'Enlargement or reduction' is displayed in the 'Basic
settings' section.
126.
Chapter 3 - The Copy Function
Types of copy job settings
'About
'Make an enlarged or
111