Sample Configuration; Figure 4.1 Connecting Programming Sources To J2 Connector; Figure 4.2 Sample Analog Programming Configuration - Xantrex XHR 7.5-130 Operating Manual

Remote Operation
Remote Analog Programming of Output Voltage and Current Limit

Figure 4.1 Connecting Programming Sources to J2 Connector

Sample The sample configuration in
Configuration for:
•
•

Figure 4.2 Sample Analog Programming Configuration

70
0-10 Vdc programming of the output voltage
local control (front panel control) of the output current limit
Figure 4.2 shows the required settings and connections
Operating Manual for XHR Series Power Supply
SW1-3: ON (CLOSED)
J2 Jumper: 3 to 4