Sw1 Programming Switch; Figure 1.3 Rear Panel With High Voltage Output Connector; Figure 1.4 Sw1 Programming Switch - Xantrex XHR 7.5-130 Operating Manual

Figure 1.3 Rear Panel with High Voltage Output Connector

SW1 The SW1 Programming, Monitoring, and Shutdown Select switch is an 8-position
piano DIP switch located on the power supply's rear panel. The SW1 switch enables
Programming
you to choose:
Switch
•
•
•
•
•
The power supply is shipped with the SW1 switch set in the default operating
configuration, as illustrated in

Figure 1.4 SW1 Programming Switch

Revision A
Local Sense Wires
(See page
(For 60 V to 600 V models.)
Output voltage and current limit programming scales
Output voltage and current monitor scales
Remote shutdown circuit logic
Resistive programming of output voltage or current limit
Over temperature shutdown mode
(Shown in its default configuration.)
DC Output and Local Sense Connector
48.) (See
Figure 1.4.
Features and Specifications
Rear Panel Connectors and Switch
100/120/200/240V
50/60 HZ
1300VA
page 39 for more information.)
100/120/200/240V
50/60 HZ
1300VA
19