Advanced Cmos Setup - IEI Technology Rocky-3702EV User Manual

4.3

Advanced CMOS Setup

Advanced CMOS Setup is designed the purpose of tuning the
ROCKY-3702EV board to operate in its best performance. For
common operation use, customers don't have to change any of
the default settings for the default setting is pre-set to run the
most reliable operation.
The following screen will be displayed if you select Advanced
CMOS Setup:
You can change the value of each options by using <PgUp> and
<PgDn> key. The available values are shown on the right
screen.
Quick Boot > Enabled: this will enable the BIOS to boot
quickly when you turn on your computer. The BIOS will
only check the first 1MB of the system memory.
Quick Boot > Disabled: the BIOS will test all system
memory when it boots up. It will spend about 40 seconds
until it receives a Ready signal from the HDD. It will also
wait for you to press the <Del> key or not.
22