Pci / Plug And Play Setup - IEI Technology Rocky-3702EV User Manual

Celeron & pentium iii processor with vga & ethernet sbc

Table of Contents

4.6

PCI / PLUG AND PLAY Setup

The setup help user handles the ROCKY-3702EV board's PCI

function. All PCI bus slots on the system use INTA#, thus all

installed PCI slots must be set.

Plug and Play Aware O/S > Yes or No

When PNP OS is installed, interrupts will be reassigned by

the OS when the setting is Yes. When a non-PNP OS is

installed or to prevent reassigning of interrupt settings,

select setting to No.

Clear NVRAM > to specify whether BIOS has to clear

NVRAM on every boot or not.

PCI Latency Timer (PCI Clocks) > to define the latency

timing (PCI clock) for all PCI devices on the PCI bus.

PCI VGA Palette Snoop > this option is useful only for

system with more than one VGA devices connected to it

through different bus (one PCI and one ISA). To enable

those various VGA devices to handle signal from the CPU

Table of Contents