IEI Technology Rocky-3702EV User Manual page 35

IR Duplex Mode > to specify the mode of IR device that
is connected to the IR port.
IrDA Protocol > to specify the function mode if an IrDA
mode is selected.
Onboard Parallel Port > to specify the I/O port address
of the parallel port.
Parallel Port Mode > to specify the mode of parallel port.
The options are:
Normal (normal parallel port mode),
Bi-Dir (supports bidirectional transfer),
EPP (supports devices that comply with the
Enhanced Parallel Port specification),
ECP (supports devices that comply with the
Extended Capabilities Port).
Parallel Port IRQ > to assign certain IRQ to the parallel
port. The optimal and fail-safe settings is 7.
Parallel Port DMA Channel > available only if the
parallel port mode is ECP. The optimal and fail-safe
settings is 3.
Onboard IDE > to define which on-board IDE controller
channel(s) to be used. Available options are: Primary,
Secondary, Both and Disabled.
33