Auto-Detect Hard Disk; Auto Configuration With Optimal Settings - IEI Technology Rocky-3702EV User Manual

Celeron & pentium iii processor with vga & ethernet sbc

Table of Contents

4.10 Auto-Detect Hard Disk

This option detects the parameters of an IDE hard disk drive

(HDD sector, cylinder, head, etc) automatically and will put the

parameters into the Standard CMOS Setup screen. Up to 4 IDE

drives can be detected and the parameters will be listed in the

box. Press <Y> if you accept these parameters. Press <N> to

skip the next IDE drives.

Note: If your IDE HDD was formatted in previous older system,

incorrect parameters may be detected. In this case, you

need to enter the correct parameters manually or low-

level format the disk.

4.11 Auto Configuration with Optimal

Settings

This option lets you load the Optimal default settings. These

settings are best-case values which will provide the best

performance. Whenever your CMOS RAM is damaged, this

Optimal settings will be loaded automatically.

Table of Contents