Table of Contents
Advertisement
Primary Display > to define the type of display monitor
of the system. The Absent option is for network file servers.
Password Check > to define if a password is necessary or
not for access to BIOS setup.
Boot to OS/2 > if you are running the OS/2 operating
system, this option must be set to yes. It means you
permit BIOS to run properly if OS/2 or any other OS that
does not support Plug and Play is found in your computer.
CPU Serial Number > this option is available only if you
®
use Pentium
III processor.
Cache Bus ECC > this option is available only if you use
®
Pentium
III processor.
System BIOS Cacheable > to define whether or not the
memory segment FOOOH can be read from or written to
cache memory. Setting it to Enabled will accelerate your
system operation.
XXXX, 16k Shadow > ROM Shadow is a technique in
which BIOS code is copied from slower ROM to faster RAM.
If you enable it then the BIOS will be executed from the
RAM. Each option allows 16KB segment to be shadowed to
the RAM.
24
Advertisement
Table of Contents
