Realpresence Collaboration Server (Rmx) 1500 Components; Realpresence Collaboration Server (Rmx) 1500 Front Panel; Opening The Collaboration Server (Rmx) 1500 Front Panel - Polycom 1500 Hardware Manual

RealPresence Collaboration Server (RMX) 1500 Hardware Guide
• You are required to register all Polycom Software Licenses that you have purchased when
retrieving the Activation Key. For example, ISDN, Encryption and Network Separation each have
different Polycom Software Licenses.
• On the Collaboration Server (RMX) 1500 MPMx-Q assembly, the use of HD with Continuous
Presence requires an additional licence.
The parameters in the lan.cfg file are uploaded from the USB key to the RMX's memory and applied
during the power-up sequence.
System power-up sequence may take up to five minutes.
During the First-time Power-up the red ERROR LED on the RMX's front panel remains ON until both
the Management and IP Network Services have been defined.
When the RMX's configuration is completed (including the Management and IP Network Services),
and if there are no System Errors, the green READY LED (on the RMX's front panel) turns ON.
3 Remove the USB key. For more information see, the RealPresence® Collaboration Server
1500/1800/2000/4000 Getting Started Guide,
ISDN/PSTN Network Service Settings
RealPresence Collaboration Server (RMX) 1500
Components
On the Collaboration Server (RMX) 1500 components are located on both the front and rear of the MCU as
listed in the following tables:
RMX 1500 Rear Panel - RTM IP 1500 Component Description

RealPresence Collaboration Server (RMX) 1500 Front Panel

The front panel enables access to the RMX 1500 using a USB key, keyboard, mouse and VGA connection.

Opening the Collaboration Server (RMX) 1500 Front Panel

The Collaboration Server (RMX) 1500 has a front panel which can be opened by pressing on the location
shown in the following illustration.
Polycom, Inc.
.
RealPresence Collaboration Server (RMX) 1500 Front Panel Description
Procedure 4: Modifying the Default IP Service and
.
and
23