Status Indicator Lights; Figure 5-2 Location Of Status Indicator Lights; Table 5-11 Status Indicator Leds - Xantrex GT2.5-NA Owner's Manual

Monitoring the Inverter

Status Indicator Lights

5–10
http://www.wholesalesolar.com/inverters.html
The GT Inverter is equipped with two status indicator lights (LEDs) located below
the front panel LCD (Figure 5-2). These LEDs indicate the inverter's current
status (Table 5-11) and assist in troubleshooting the performance of the unit.
Only one indicator light will be lit at any time.

Table 5-11 Status Indicator LEDs

LED on Means
GREEN GT Inverter is on (DC voltage and AC voltage are qualified and the
protection timer has finished) and delivering energy to the grid. No
action required. Turns off when a fault state is detected.
RED Ground fault condition detected.
Check for any fault messages on the display (see Table 5-8), and refer
also to Table 6-1, "Troubleshooting the GT Inverter" on page 6–9 to
resolve the fault condition.
Green LED
Grid Tie Solar Inverter

Figure 5-2 Location of Status Indicator Lights

http://www.wholesalesolar.com/inverters.html
Red LED
975-0245-01-01