Xantrex GT2.5-NA Owner's Manual page 49

Mounting Multiple Inverters
975-0245-01-01
http://www.wholesalesolar.com/inverters.html
As shown in Figure 2-10, inverters can be mounted side by side on wallboard or a
plywood support.
Conduit nipples should be installed on one side of the first inverter before
mounting on the bracket. Ensure that the sealing ring is located on the conduit
nipple between inverters, i.e., on the outside of the wiring box. The lock nut is
attached after the nipple is inserted into the conduit hole of the second inverter.
http://www.wholesalesolar.com/inverters.html
Mounting the Inverter
2–23