Figure 3-9 Male Network Terminator; Figure 3-10 Xanbus Rj45 Ports In The Gt Inverter Wiring Box - Xantrex GT2.5-NA Owner's Manual

Terminators
GT Inverter Xanbus
Ports
975-0245-01-01
http://www.wholesalesolar.com/inverters.html
Male network terminators (Figure 3-9) are required at both ends of the network to
ensure the communication signal quality on the network.

Figure 3-9 Male Network Terminator

Two RJ45 ports are provided in the GT Inverter, accessible from the wiring box.
See Figure 3-10 for the location of these ports.
RJ11 ports RJ45
(not used) Xanbus ports

Figure 3-10 Xanbus RJ45 Ports in the GT Inverter Wiring Box

http://www.wholesalesolar.com/inverters.html
Communications Wiring for Multiple Inverters
RS-232 port (used to connect a PC to use GT-View.
See page 3–18 and page 5–9)
Male network terminator
3–13