Wiring the Inverter
Cabling Requirements
RJ45 Connector Requirements
3–14
http://www.wholesalesolar.com/inverters.html
CAUTION: Equipment damage
Do not use crossover cable in a Xanbus system.
The network uses Category 5 (CAT 5) cable, a standard cable available from any
computer supply store. The cable consists of eight conductors in four twisted pairs
with an RJ45 modular connector wired to the T568A standard. Table 3-2 contains
the arrangements of wire colors to pin numbers for the T568A standard.
Table 3-2 T568A Standard Wiring
Pin Number Conductor Name
1
NET_S
2
NET_S
3
NET_C
4
CAN_L
5
CAN_H
6
NET_C
7
NET_S
8
NET_C
The network cable uses modular RJ45 connectors, as shown in Figure 3-11. The
connector is suitable for cost-sensitive applications and is easily installed. The
RJ45 connector should be a modular plug, 8-position, 8-contact for round,
stranded, unshielded cable.
Figure 3-11 RJ45 Connector
http://www.wholesalesolar.com/inverters.html
CAT 5 Cable Insulation Color
White/Green
Green
White/Orange
Blue
White/Blue
Orange
White/Brown
Brown
975-0245-01-01