Planning Preparations
AC, DC, and Network Components
For a successful installation, you need to plan for AC, DC,
and network components of the power system. The AC and
DC components are described in this section and illustrated in
Figure 3 on page 8.
AC components include:
•
AC Input
•
AC Loads
•
AC Disconnect and Over-Current Protection Device
•
Distribution Panels
•
AC Wiring
DC components include:
•
24-volt Batteries
•
DC Cabling
•
DC Cabling
•
DC Grounding
975-0697-01-01
Network considerations for Freedom SW only include:
•
Cables, connectors, network connectors, and terminators
for the SCP and Automatic Generator Start, if installing.
Detailed information on planning and installing your
network is available in the Xanbus System Installation
Guide. Refer to the system guide to determine the type of
network layout to install, as well as guidelines for
installing the network. This guide is available for
download at www.xantrex.com
7