Connecting The Ethernet Cable; Connecting The Power Cord - Genicom Intelliprint ML450 User Manual

Connecting the Ethernet Cable

Attach appropriate cable to your Ethernet hub.
1.
Attach the opposite end of the cable to the ethernet port on the printer.
2.

Connecting the Power Cord

Connect the printer to an AC outlet as described below.
WARNING: To prevent the risk of electric shock, never touch the power cord or plug with
wet hands.
CAUTION: When disconnecting the power cord, always grasp the plug and do not pull at the
cable. Damage to the cord can lead to fire and electric shock.
Do not plug the printer into an AC outlet with incorrect voltage.
"
Do not use any multi-extension cord connector otherwise there is a risk of fire and electric shock.
"
Do not use extension cords with rated current less than 124V 15A. Never use extension cords with
"
low capacity, or extreme heat or flame may result. Consult your dealer on the correct type of extension
cord to use.
Do not damage or modify the extension cord. Also, do not bend, pull, or place heavy objects on the
"
extension cord otherwise the extension cord may be damaged and result in fire hazard or electric
shock.
See "Safety Notes" on page B-2.
"
Insert the power cord into the AC connector on the printer
1.
Aug 01
GENICOM LN45 and Intelliprint mL450 User Guide 1-15
AC OUTLET POWER CORD
Genicom
For standard configuration
Publication No. GEG-99126