Table of Contents
Advertisement
7-6
GENICOM LN45 and Intelliprint mL450 User Guide
Installing a FLASH DIMM Module
Carefully insert a FLASH DIMM module in FLASH DIMM slot as shown below. When properly
4.
seated, gently push down on the DIMM until the white braces close onto the ends of the DIMM.
NOTE:
To remove the FLASH DIMM, pull the white braces away from the ends of the DIMM until the
DIMM snaps out of the slot.
Reinstall the controller assembly. Once firmly in place, push and hand tighten the thumbscrews in a
5.
clockwise direction.
Publication No. GEG-99126
Genicom
Aug 01
Advertisement
Table of Contents
Troubleshooting
