NOTE:
The upper left cover can be closed only when the EP cartridge is installed in the printer. Do not
close it when the EP cartridge is not inside the printer.
Rear View
1
2
3
4
5
6
Operation Panel
Display
Shows error messages and other status information. Refer to
Control Panel Menus"
panel.
Aug 01
DUPLEXER connector
OUTPUT connector
TRAY connector
Power cord receptacle
AC outlet
Controller
for a detailed discussion about using the LCD display and push-buttons of the control
GENICOM LN45 and Intelliprint mL450 User Guide 2-3
Connects to the optional duplexer.
Connects to the optional Finisher/Stapler unit.
Connects to the optional HCF (High Capacity Feeder)
unit.
Connects to an AC outlet.
Supplies power to the optional Finisher/Stapler unit.
Houses the parallel and RJ45 ports and optional
network interfaces.
"Chapter 4 Understanding and Navigating the
Genicom
Rear View
Publication No. GEG-99126