Genicom Intelliprint ML450 User Manual page 113

Open the front cover as indicated.
3.
Never touch the fuser area where a label indicating high temperature is located (such as
that shown below), or else burns may result.
Remove the EP cartridge. Lift the orange handle lever on the cartridge to gently take it out. Then hold
4.
the handle and completely remove the cartridge. Be careful about the toner falling out, then wrap the
used EP cartridge in its original packing and dispose it properly. Never dispose of it by burning.
Aug 01
GENICOM LN45 and Intelliprint mL450 User Guide 5-9
Replacing the EP cartridge (when options are installed)
Genicom
Publication No. GEG-99126