Ethernet Network Interface Troubleshooting - Genicom Intelliprint cL160 User Manual

FRONT COVER OPEN
LOAD PAPER TRAY1
LOAD PAPER TRAY2
LOAD PAPER TRAY3
TRAY 1 MISSING
TRAY 2 MISSING
TRAY 3 MISSING
OUTPUT TRAY FULL
TONER Y EMPTY
TONER M EMPTY
TONER C EMPTY
TONER K EMPTY
PHD LIFE OVER
BTR LIFE OVER
FUSER LIFE OVER
NOTE: 1: These faults are not necessarily hard faults. They only become hard faults when an attempt is
made to use the "faulted" device. For these errors, the printing can continue if one simply
avoids the problem. For instance, "tray trouble" faults usually indicate that the tray in question
has been removed. These errors are only treated as faults when there is no alternative action to
take. Your printer may be configured so that the problem is easily avoided. When the problem
cannot be avoided, the described faults will be displayed.
2: The Communications Error indicates an error that requires a service call. However, before
arranging for a service call, ensure that all associated cabling is correctly installed.

Ethernet Network Interface Troubleshooting

This section offers various troubleshooting procedures and technical support advice for the Ether-
net network interface.
Apr 02

Ethernet Network Interface Troubleshooting

CLOSE CLOVER
LOAD PAPER
ACCORDING TO
REQUESTED SIZE
AND MEDIA TYPE
REPLACE TRAY
REMOVE PAPER
REPLACE TONER
REPLACE TONER
REPLACE TONER
REPLACE TONER
REPLACE PHD
REPACE BTR
REPLACE FUSER
Genicom
GENICOM Intelliprint cL160 User Guide 3-13
Front cover is open.
There is an empty
paper tray.
There is a paper tray
missing.
The output tray is full.
Yellow toner cartridge
is empty.
Magenta toner
cartridge is empty.
Cyan toner cartridge is
empty.
Black toner cartridge
is empty.
Print Head Cartridge
needs to be replaced.
Bias Transfer Roll
needs to be replaced.
Fuser needs to be
replaced.
Close front cover.
Put paper in empty
paper tray.
Replace missing paper
tray.
Remove the paper
from the output tray.
Replace Yellow toner
cartridge.
Replace Magenta toner
cartridge.
Replace Cyan toner
cartridge.
Replace Black toner
cartridge.
Install new Print Head
cartridge.
Install new Bias
Transfer Roll.
Install new Fuser.
Publication No. GEG-99141