Genicom Intelliprint ML450 User Manual page 3

How This Manual is Organized
This manual consists of 7 chapters and 5 appendices as follows:
Chapter 1
Describes a suitable location for your laser printer and how to unpack and install it. Be sure to read this chap-
ter before setting up the printer..
Chapter 2
Describes the parts of the printer and paper handling options and their functions. A discussion of the paper
path is also included. Also describes all available options and consumables for your printer and their respec-
tive part numbers.
Chapter 3
Provides information on paper qualities, paper size requirements, paper paths, paper output delivery and
loading of paper in your printer and options.
Chapter 4
This chapter explains the control panel and its functions, and also demonstrates how to navigate through the
control panel menus and submenus that allow you to view and change the printer settings.
Chapter 5
Describes how to handle and replace the EP cartridge, replacement of transfer and feed rollers and perfor-
mance of other steps as necessary for day-to-day operation of your printer..
Chapter 6
Explains procedures to isolate and solve problems that may occur during use of your printer. Clearing paper
jams and detailed troubleshooting of LCD error messages are discussed in this chapter. Troubleshooting the
Ethernet network interface is also discussed in this chapter.
Chapter 7
This chapter describes the procedures for installation of DRAM memory DIMMs and FLASH DIMM mod-
ules. Downloading software to the FLASH DIMM module is also discussed in this chapter.
Appendix A
Provides information on how to contact GENICOM LLC for technical support, service and repair issues,
and also provides part numbers for the printer, options, and consumables.
Appendix B
Describes cautions to take when installing, transporting, or operating the printer. Also includes applicable
regulatory compliances of your printer.
Appendix C
This appendix explains the procedure for printing summaries of PCL or PostScript fonts installed in your
printer..
Appendix D
This appendix lists some of the most frequently-used commands of the Print Server command set. More
information about the command set, including additional options, can be found in the Ethernet Network
Interface Manual on the Electronic Library CD-ROM.
Aug 01
Unpacking and Installing Your Printer
Printer and Options Parts and Functions
Understanding Paper, Paper Paths, Paper Delivery and Paper Loading
Understanding and Navigating the Control Panel Menus
Printer Consumables, Cleaning and Maintenance
Troubleshooting
Using DRAM DIMMs, FLASH DIMMs and Power-on Files
General Information
Safety Notes and Regulatory Compliances
Printing Font Summaries
Frequently Used Ethernet Commands
GENICOM LN45 and Intelliprint mL450 User Guide
Chapter 1 Unpacking and Installing Your Printer
Genicom
iii
Publication No. GEG-99126