Table of Contents
Advertisement
2-2
microLaser 210 User Guide
Connecting the Printer to the AC Outlet
About this Chapter
This chapter provides information concerning the daily use of the printer, including procedures for
connecting the printer and loading print media, and guidelines for selecting print media.
Connecting the Printer to the AC Outlet
Use the following procedure to connect the power cord and turn the printer on:
1.
Insert the power cord into the AC connector on the rear of the printer.
2.
Verify that the power switch of the printer is in the [O] (off) position, then insert the plug of
the power cord into the AC outlet.
Publication No. GEG-99054
Genicom
Mar 00
Advertisement
Table of Contents
