Table of Contents
Advertisement
Aug 2001
Frequently-used Server Commands
Command
Option(s)
DEFINE SERVICE
TCPPORT string
"name" option
TELNETPORT string
INITIALIZE option
DELAY num
CANCEL
FACTORY
NOBOOT
RELOAD
LOGOUT option
<nothing>
PORT num
PURGE SERVICE
LOCAL
option
"service"
SET PRIVILEGED
{SHOW|MONITOR} QUEUE
{SHOW|MONITOR} SERVER
{SHOW|MONITOR}
<nothing>
SERVICE option
"service"
ZERO COUNTERS
ALL
option
PORT num
Genicom
GENICOM LN45 and Intelliprint mL450 User Guide
Description
Specifies a
raw
service. Enter a socket number (4000 to
4999) or the word none.
Specifies a TCP listener socket for the
service. Unlike TCPport, this option
performs Telnet IAC interpretation on the
data stream. Enter a socket number (4000
to 4999) or the word none.
Schedules a reboot after
a value from 0 to 120.
Cancels an impending initialization.
Reboots the server to its factory default
settings.
Forces the Server to stop in Boot
Configuration Mode rather than fully
rebooting.
Forces the Server to download new
operational code and reprogram its
flash-ROM.
Logs out the current port (the port that
issued the command).
Logs out the specified port.
Removes the definitions of all local services.
Removes the definition of the specified
service.
Enters privileged mode, provided the user
enters the proper privileged password when
prompted.
Displays the status of Server queues once
(Show) or continually every three seconds
(Monitor).
Displays Server information once (Show) or
continually every three seconds (Monitor).
Displays characteristics about all configured
services once (Show) or continually every
three seconds (Monitor).
Displays only characteristics related to the
named service.
Zeroes all port, node, and Server counters.
Zeroes port counters for the specified port.
D-5
TCP listener socket for the
minutes. Enter
num
Publication No. GEG-99126
Advertisement
Table of Contents
Troubleshooting
