4-18
GENICOM LN45 and Intelliprint mL450 User Guide
System Menu
Job Timeout
This submenu allows you to
increase or decrease the time limit
(in seconds) for PostScript jobs. A
0 setting indicates no timeout. This
setting applies only to PostScript
jobs.
Jam Recovery
This submenu allows you to turn
jam recovery on or off.
Hex Print
This submenu allows you to print
hexadecimal characters.
Toner Out
This submenu allows you to specify
whether the printer should stop or
continue when out of toner.
Publication No. GEG-99126
0
0 - 99999
On
On
Off
Off
On
Off
Stop
Stop
Continue
Genicom
1. Press NEXT or PREVIOUS to
increase or decrease each digit of
the five-digit number.
2. Press SELECT set one digit and
move to the next digit.
3. Press SELECT after changing the
last digit to save this setting.
1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
1. Press NEXT or PREVIOUS to toggle
between STOP and CONTINUE.
2. Press SELECT to save this setting.
Aug 01