Dialing Using A Speed Dial Number; Dnd (Do Not Disturb); Muting A Call; Accessing Your Voicemail - Talkswitch TS-350i User Manual

DIALING USING A SPEED DIAL NUMBER

The TS-350i has a Phone Book that can store up to 80 contacts. Each record includes a name, contact
information and a speed dial number (00–79). When you dial a speed dial number, the phone initiates a
call to the contact. By default, the speed dialing feature is enabled. If disabled, this feature will not work.
To place a call using a speed dial number:
• Dial the speed dial number (00–79), then press the Dial softkey or press # to place the call to the
desired contact. The phone will dial the number programmed in the phone book. If an access code has
been preprogrammed for the phone (example: 9 for gaining access to outside lines), the access code
will automatically be prepended to the programmed speed dial entry for placing the call.

DND (DO NOT DISTURB)

When the DND (Do Not Disturb) feature is activated, the phone will not notify you of an incoming call thus
allowing you to work without interruptions from incoming calls. Calls will be routed according to the
settings programmed for your extension or service.
To activate DND:
• While the phone is idle, press the
not disturb is displayed on the LCD.
To deactivate DND:
• Press the illuminated

MUTING A CALL

Mute toggles the microphone of the handset, speakerphone and headset off or on. When mute is active,
the connected party will not hear anything from the TS-350i.
To mute the microphone:
• Press the button. The
To unmute the microphone:
• Press the illuminated

ACCESSING YOUR VOICEMAIL

When you have a message waiting, the Message LED flashes to indicate you have new messages in your
mailbox.
To access your voice mailbox:
• Press the Vmail softkey. Follow the instructions from your voicemail system to listen to messages.
E V E R Y C A L L C O U N T S
button. When active, the
button again.
button LED illuminates red indicating mute is active.
button again. The other person will hear audio once the mute LED is off.
button LED illuminates red, and Do
6 3