Call Waiting; Call Waiting Tone; Call Hold Ringback - Talkswitch TS-350i User Manual

Call Waiting

With Call Waiting configured for a TalkSwitch extension, notification of a new incoming call is indicated
via several methods. The dedicated extension button flashes to indicate the new call, and an optional
beep tone is delivered over the existing conversation. In addition, the LCD displays the incoming Caller ID
during the notification.
If Call Waiting is disabled, the phone will return a busy status to the phone system and it will handle the
call accordingly. By default, Call Waiting is enabled on all TS-350i phones.
To enable/disable Call Waiting:
• Press the button, then select 4. Call Preferences, then 2. Call Waiting.
• Press the On softkey to enable Call Waiting, or press the Off softkey to disable Call Waiting.
• Press the Back softkey or the

Call Waiting Tone

While in a call, the phone can provide a tone over the existing conversation to indicate a call waiting. To
receive the tone, Call Waiting must also be enabled.
To enable/disable Call Waiting Tone:
• Press the button, then select 4. Call Preferences, then 3. Call Waiting Tone.
• Press the On softkey to enable Call Waiting Tone, or press the Off softkey to disable Call Waiting Tone.
• Press the Back softkey or the

Call Hold Ringback

With Call Hold Ringback enabled, the phone rings if the first call is placed on hold then a second call is
taken and terminated by hanging up the phone. It is a reminder that there is still a call on hold.
To enable/disable Call Hold Ringback:
• Press the button, then select 4. Call Preferences, then 4. Call Hold Ringback.
• Press the On softkey to enable hold ringback, or press the Off softkey to disable hold ringback.
• Press the Back softkey or the
2 6
button to exit the menu.
button to exit the menu.
button to exit the menu.
T S - 3 5 0 i U S E R G U I D E