Internet Update
•
Press the
button.
•
Press 3 for Phone Settings then select 7. Firmware Update.
•
Press 2 to access the TFTP Server Address.
•
Write down the IP address shown on the screen. This will be required once the update is complete.
•
Clear the current entry and enter tsphones.talkswitch.com. Once changed, the phone will request a
reboot. Select Yes.
After the Update
•
Press the
button.
•
Press 3 for Phone Settings then select 7. Firmware Update.
•
Press 2 to access the TFTP Server Address.
•
Enter the IP address that was previously entered to point the phone back to your TalkSwitch phone
system. Once changed, the phone will request a reboot. Select Yes.
Using the IP Phone Update Utility
If your phones are on a closed network (no Internet access), or you are having problems with updating over
the Internet, you can download the IP Phone Update Utility from http://www.talkswitch.com/support.
•
After installing the application, run it.
•
Follow the directions in the update utility for performing the update.
E V E R Y C A L L C O U N T S
6 7